Packing of piece goods
Horizontal hose flow-pack machine MH5 series are used for packaging of piece goods into bags.
Packaging is in continuous mode. Goods are separately or on pad inserted into the feeding conveyor.
On bag is possible to print additional information. Machine operation carried out by one or two workers for manual insertion of the goods.
Technical parameters
| machine type | MH5 | MH5 GAS | MH5bb |
| output* (pcs/min.) | up to 210 | up to 90 | up to 120 |
| product width (mm) | 10 - 140 | 10 - 140 | 50 - 240 |
| product length (mm) | 26 - 450 | 25 - 400 | 150 - 2000 |
| product height at double jaw (mm) | 1 - 50 | 1 - 60 | |
| product height at single jaw (mm) | up to 100 | up to 100 | up to 150 |
| product perimeter (with brake adjustment) (mm) | up to 390 | up to 390 | up to 500 |
| power supply | 3 x 230 V/400 V - 50 Hz | 3 x 230 V/400 V - 50 Hz | 3 x 230 V/400 V - 50 Hz |
| power (kW) | 2,8 | 3,0 | 4,0 |
| air pressure (MPa) | 0,6 | 0,6 | 0,6 |
| air consumption (l/bag) | 0,1 | 0,1 | 0,1 |
| machine weight (kg) | 360 | 400 | 560 |
| machine dimensions H x W x L (mm) | 1700 x 900 x 3650 | 1700 x 1250 x 3604 | 1800 x 1300 x 4000 |
| guaranteed residual oxygen content O2** (%) | up to 0,9 | ||
| gas consumption in the output of 50 pcs / min (l / hr.) | approx. 500 |
* Output is dependent on the products size and on the type of packaging materials.
** Depending on the type of packaged products.
Packaging
| machine type | MH5 | MH5 GAS | MH5bb |
| heat sealable film | ● | ● | ● |
| pressure stick film | ● | ● | |
| roll diameter (mm) | up to 400 | up to 400 | up to 300 |
| diameter of cavity (mm) | 50 - 75 | 50 - 75 | 50 - 75 |
| roll width (mm) | up to 340 | up to 340 | up to 55 |
| with adjustment of roll brake (mm) | up to 450 | up to 450 |
Machine description
| machine type | MH5 | MH5 GAS | MH5bb |
| control system B&R | ● | ● | ● |
| electromechanical drive of transverse jaw | ● | ● | ● |
| electromechanical drive of longitudinal jaw | ● | ||
| mechanical drive of longitudinal jaw | ● | ● | |
| pressure by compressed air | ● | ● | ● |
| inserting feed conveyor | ● | ● | ● |
| discharge conveyor | ● | ● | ● |
| jaws for heat sealing | ● | ● | ● |
| equipment for filling of bags by inert gas | ● | ||
| table for analyser, event. converter of inert gas | ● | ||
| signal watch light | ● |
Advantages
| machine type | MH5 | MH5 GAS | MH5bb |
| contact-free and maintenance-free power transfer to rotary jaws | ● | ● | ● |
| central machine control including inserting units | ● | ● | ● |
| saving of all set values into pre-selections | ● | ● | ● |
| register of defects, delays and stops | ● | ● | ● |
| possibility to print data on printer | ● | ● | ● |
| connection to central control station | ● | ● | ● |
| possibility to choose from operating languages | ● | ● | ● |
| notification on service interval | ● | ● | ● |
| low power and air consumption | ● | ● | ● |
| program service inspection and the machine settings through phone line (modem) | ● | ● | ● |
| 2 decentralized drives | ● |
Accessories
| machine type | MH5 | MH5 GAS | MH5bb |
| feeding conveyor lengthened according to requirements | ● | ● | ● |
| feed conveyor chain with tenons and their distance according to products | ● | ● | ● |
| photocell for print centring | ● | ● | ● |
| jaws for pressure sealing | ● | ● | |
| jaws for cutting of Eurolock | ● | ● | |
| continuous marking device | ● | ● | ● |
| thermal transfer printer | ● | ● | ● |
| inkjet printer | ● | ● | ● |
| loader according to goods class | ● | ● | ● |
| adjustment for gas flush | ● | ● | |
| residual oxygen content analyzer with discarding | ● | ● | ● |
| counting and organization of bags | ● | ● | ● |
| bag cutting off – smooth, zig-zag, preforation (every second bag) | ● | ● | ● |