SME is a horizontal hose packaging machine designed for packing piece and loose goods in sacks.
SME is a horizontal hose packaging machine designed for packing piece and loose goods in sacks.
Technical parameters
| dose volume (liters) | up to 100 |
| output* (sacks/min.) | up to 3 |
| sack length (mm) | 1360 and 1400 |
| sack width (mm) | 640 and 670 |
| packing material | half-sleeve, max. diameter of roll 450 mm |
| power supply | 3 x 230V/400V - 50 Hz |
| power without filler (kW) | 4,3 |
| air pressure (MPa) | from 0,6 to 0,8 |
| air consumption at 0,6 MPa (liters/min.) | 65 |
| noise (dB) | up to 75 |
| machine weight (kg) | 1100 |
| dimensions H x W x L (mm) | 2300 x 1040 x 8400 |
* Output is dependent on the dose size, kind of products and capacity of used filler.
Description
| display of minute capacity |
| pneumatics Rexroth, Festo |
| electronics resistant to short circuit, reversing of polarity, overload |
| lifelong lubricant fills |
| electrical cover IP 44 |
| shift of film by chain and belt |
| autodiagnostics |
| date printing by means of marking device MARK 1 |
| all functions are set from control switchboard |
| areas which are in contact with the goods are made of stainless steel |
| all parts of the machine are protected health harmless surface treatment |
Advantages
| simple setting of function on control panel |
| atuo-check of most important parameters |
| delay in pulling of film for dusty wares |
| termination of operation after achieving of required number of sacks |
| screen counter of bags made till termination of operation |
| list of total number of cycles |
| simple design of drives |
Accessories
| belt conveyor |
| screw conveyor |
| discharge conveyor |
| photocell for print centring |
| labelling device |
| compressor 15 - 20 cubic meters |