Unit til forseglede / svejste emballage kanter SH

Unit til pre-producerede poser med svejsete amballage kanter, på en vertikal eller horisontal pakkemaskine.

Technical parameters
Machine type	SH440	SH550	SH600	SH730
Foil speed (m/min.)	to 14	to 14	to 14	to 14
Foil width (mm)	to 440	to 550	to 600	to 730
Power supply	230 V/50 Hz	230 V/50 Hz	230 V/50 Hz	230 V/50 Hz
Power (W)	1200	1200	1200	1200
Air consumption at 0,6 MPa (l / cycle)	60	60	60	60
Noise (dB)	do 75	do 75	do 75	do 75

Types of welded edges

overlapping edges

welded edges

Bag types

bag with welded edges and folded bottom

bag with welded edges, folded bottom and folded upper weld with a sticker

flat bag with welded edges and in-folded sides

Description

when used on machines ASTRO with a control system B&R, the device uses the packaging machine control unit

if the device is used on a machine from another manufacturer, it uses its own control unit

Festo pneumatic drive

electronic control system resistant against short circuit, polarity inversion, overload

electric coverage IP 44

all function setup from the control panel

all components are protected with a surface treatment corresponding to health regulations

when using one-side weldable foil, the edges are overlapping

when using two- side weldable foil, the edges can be welded

suitable for PP foil and other PP-based laminates

the device has industrial patent

Application

the device can be used on packaging machines from other manufacturers. Installation using a special bracket according to the type of the packaging machine

on machines ASTRO with a control system B&R the device uses the packaging machine control panel

Advantages

possible to install on machines from other manufacturers

can be used with new or older packaging machines

can be used for all bag sizes and types

does not limit output of the packaging machine

easy and reliable actuation

easy installation